View source for Module:Convert/extra

-- Extra conversion data used by Module:Convert.
--
-- [[Module:Convert/data]] defines all units and is transcluded in all pages
-- where [[Module:Convert]] is used. Testing new units by editing that module
-- would invalidate the cache for all affected pages.
--
-- For quick changes and experiments with new units, this module can be edited.
-- Since this module is transcluded in only a small number of pages, changes
-- should cause little server overhead and should propagate quickly.
--
-- If a unit is defined in the data module, any definition here is ignored,
-- so defining the same unit in both modules is not an error.
-- A unit defined here can refer to units that are also defined here, and
-- can refer to units defined in the data module.
--
-- Periodically, those extra units that are wanted permanently can be removed
-- from here after being added to [[Module:Convert/data]].

local extra_units = {
    ["sec"] = {  -- experiment per request at [[Template talk:Convert#Auto-select time unit?]]
	_name1   = "second",
	_symbol  = "s",
	utype    = "time",
	scale    = 1,
	prefixes = 1,
	default  = "v < 7200 ! min ! h",
	link     = "Second",
    },
    ["inches"] = {
	target   = "in",
    },
    ["bit"] = {
	_name1   = "bit",
	_symbol  = "bit",
	utype    = "information",
	scale    = 0.125,
	prefixes = 1,
	default  = "B",
	link     = "Bit",
    },
    ["B"] = {
	_name1   = "byte",
	_symbol  = "B",
	utype    = "information",
	scale    = 8,
	prefixes = 1,
	default  = "bit",
	link     = "Byte",
    },
    ["DW-tonne"] = {
	name1_us = "deadweight metric ton",
	symbol   = "deadweight tonne",
	sym_us   = "~deadweight metric ton",
	usename  = 1,
	utype    = "mass",
	scale    = 1000,
	default  = "DWton",
	link     = "Deadweight tonnage",
    },
    ["hm³"] = {
	target   = "hm3",
    },
    ["MPGE"] = {  -- temporary test for scale 1609.344/(33.705*3.6e6) planned at [[Template talk:Convert#Check arithmetic for MPGe conversion]] ([[Special:PermanentLink/1133610113#Check arithmetic for MPGe conversion|permalink]])
	name1    = "mile per gallon gasoline equivalent",
	name2    = "miles per gallon gasoline equivalent",
	symbol   = "mpg&#8209;e",
	utype    = "energy per unit length",
	scale    = 1.3263314048360777e-5,
	invert   = -1,
	iscomplex= true,
	default  = "kWh/100 mi",
	link     = "Miles per gallon gasoline equivalent",
    },
}

return { extra_units = extra_units }
Description	What you type	What you get
Italic	''Italic text''	Italic text
Bold	'''Bold text'''	Bold text
Bold & italic	'''''Bold & italic text'''''	*Bold & italic text*